The main source of moisture is the ground, which solves the problem of moisture absorption at the bottom of the bathroom cabinet, and successfully blocks 50% of the water vapor infiltration in the bathroom cabinet. The development of the wall-mounted mirror cabinet can avoid the cabinet directly contacting the ground, and make maximum use of the upper space of the bathroom. The two technologies of "hanging design" and "waterproof material" are combined to make the annoying tide not come out. day.
If the bathroom cabinet is made of wooden cabinet legs, it will be easily damp, and the moisture will be led to the cabinet without knowing it. If the metal is used as the leg material to support the cabinet at the bottom of the cabinet, the problem is subtly solved. In addition, the "skeleton" of the aluminum cabinet legs is strong, and the rust-proof feature ensures that the cabinet legs do not rust after contact with water.
The wooden bathroom cabinet is easily deformed by water absorption, so it has very strict requirements on the surrounding environment, while the bathroom of an ordinary family generally has only a few square meters of space, and it is not easy to achieve a wet and dry partition. When purchasing a bathroom cabinet, you can choose to use a composite board such as fireproof board, wear-resistant board, polymer, etc. as the material of the cabinet surface, which not only has good moisture resistance, but also simulates the color of solid wood.
Rubber edge banding
Wrap the edges of the board with a multi-purpose anti-collision rubber strip to completely block the intrusion of moisture and easily eliminate the noise of closing the door.
Waterproof aluminum foil
When the basin or faucet in the bathroom encounters hot air, it will generate a lot of condensed water, which will flow into the bottom of the cabinet along the countertop, causing moldy deformation of the cabinet. If you can put a layer of waterproof aluminum foil or rubber pad on the bottom of the cabinet in time to solve this problem, put them on the bottom of the drawer to protect the bath while protecting against moisture.